Screen printing on low-temperature glass ink Doyle technical indicators, real solution to the mechanized mass production of high-quality low-temperature glass, ink, has been designated by a number of international brand.
• environmental protection standards by the European Union and Japan, Roche ST standard.
• 100 cell adhesion after water immersion 7 days then pull no effect on 3M sticky tape.
• smooth and wear-resistant coating hardness, good ink, coating the surface to avoid inadvertent damage due to friction between the surface hardness of 5H.
• High temperature acid solution ink coating 100 ℃ 30% of the alkali solution and cook 2 hours without any change in functionality with superior corrosion resistance.
• super water-white glass sandwiched between two pieces of glass coated with ink soaked in water 10 days without any change (in general will be white ink), 100 ℃ boiling 3 hours unchanged.
• low temperature in degrees Celsius -10 ℃ environment, the construction does not affect the ink ink as usual range of performance.
• good ink can be coated over the net is good, good ink transfer in 24 hours non-stick mesh screen, to resolve a long period of high volume mechanical printing.